PC Cases | Power Supply Tester | USB Vacuum Cleaner | Contact | Home    

 

 

 

...EZ Power Supply Tester 2. These simple additions of a 24-pin motherboard, SATA power, as well as a 8-pin P4 and 6-pin power connectors make it a worthy product for testing any recent power supply unit..

Overall, I was extremely pleased with the EZ Power Supply Tester 2 from Casebuy. This is definitely a must have tool for anyone who works with PCs to test power supplies before putting them into a PC..


Wow. Once again, we have had the opportunity to review an excellent product, that works flawlessly. Casebuy has developed an awesome tool for monitoring your PSU. I would reccommend this bad boy to any pc enthusiast ....


it is a device that uses to detect/check whether the power supply has any faulty voltage rails. It is not used to check the voltage rail levels of the power supply ...


 
EZ POWER SUPPLY TESTER
Model No.EZPST-2


Click Enlarge Photo






 
With the power supply being one of the most important parts of a computer, you cannot afford to install a damaged or defective unit. Corrupted data, blue screens of death, and even severe system damage can result from incorrect power being supplied to your computer.

Encased in sturdy aluminum, the EZ Power Supply Tester allows you to check the power from your 20pin or 24pin motherboard, 8pin, 6pin, 4pin and SATA connections. LED indicators let you know if power is being supplied on each voltage rail, and a master PG LED informs you of the overall result.

Note: This product is designed only for power supply output tests. Do not leave it connected to the power supply for long periods of time unattended. It generates heat and could possibly damage your power supply.
Specification..
  • Case Material:Aluminum
  • Dimensions:89x63.7x17.5mm
  • Characteristic:Light weight and Pocket size
  • Thickness :1.0mm
  • Features:PG Auto Warning,LED show each output voltage circs
    Use in Standard ATX Power Supply
  • NW:11.0KG,GW:12.0 KG,Cuft:1.0,100 pcs/CTN

In Depth-
The EZ Power Supply Tester is housed in aluminum, which makes it quite light. On the front of the unit are some instructions as well as a bunch of clearly labeled indicator LEDs. On each of the four sides are different plugs. When facing the front of the unit, the right side has the main PSU plug. Here you will plug in either your 20 or 24 pin connector. On the bottom is the plug for a four pin molex connector. On the left are plugs for p4, p6, and p8 connectors as well as a floppy connector. On the top is a plug for a SATA connector.

Testing-

After plugging in my PSU, I took its 20 pin connector and plugged it into the EZ tester. The unit made a beeping noise and all indicator LEDs on the right of the unit lit up. That's a good sign.

I then proceeded to test the rest of the connectors on my PSU in less than five minutes. The EZ PSU Tester's greatest strength is its ability to very quickly test the health of your PSU.

Overall The EZ PSU tester was great. It was able to do exactly what it says on the packaging both quickly and easily. The main drawback of this product is not a fault of the unit itself, but I though I would mention it anyway. This is a product that I imagine would not get very much use. As I mentioned before, it works great, but if you have something like a multimeter, this isn't shouldn't be the most pressing purchase for you.
ps.article data from http://www.creativemods.com/content/view/237/39/